4-channel 400Gbps DWDM 2-way OADM with Monitor ports

Product information

The H-OADM2x4-xxx-yyy-4C is a two-way 4ch DWDM add/drop filter where the channel bandwidth is wide enough to support 400G 16QAM signals. The H-OADM2x4-xxx-yyy-4C filters are part of the 400G supporting filter family which is shown via the suffix “-4C” in the part number.

The filter has four add/drop ports and one Line in “West” direction and a same setup in “East” direction. Channels outside the add/drop channel bands are glassed through the filter. The Extension port is extremely wide, covering 1264 -1630nm which opens for a wide variety of combinations of LANWDM, CWDM, DWDM and OTDR solutions over the same infrastructure. The bandwidth even extends up to 1670, but with a slightly higher loss.

The monitor ports (Mon) tap off 1% of the transmitted and received Line signal. This provides the ability to monitor the channel power levels via a connected Optical Channel Monitoring (OCM) device or an optical spectrum analyzer. The DWDM channels are compliant with ITU-T G.694.1.

There are ten different filters covering the channel band 921 to 960.

H-OADM2x4-921-924-4C, H-OADM2x4-925-928-4C, H-OADM2x4-929-932-4C, H-OADM2x4-933-936-4C, H-OADM2x4-937-940-4C, H-OADM2x4-941-944-4C, H-OADM2x4-945-948-4C, H-OADM2x4-949-952-4C, H-OADM2x4-953-956-4C, H-OADM2x4-957-960-4C

The H-OADM2x4-xxx-yyy-4C is to be fitted in the H-Series 1RU chassis H-CHASSI-1RU.

Downloads