2-channel 400Gbps DWDM 2-way OADM with Monitor ports

Product information

The H-OADM2x2-xxx-yyy-4C is a two-way 2ch DWDM add/drop filter where the channel passband width is wide enough to support 400G 16QAM signals. The H-OADM2x2-xxx-yyy-4C filters are part of the 400G supporting filter family which is shown via the suffix “-4C” in the part number. There are ten different filter products that together will cover 20 channels 921 to 940. The additional channels up to 960 can be added upon request.

The filter has two add/drop ports and one Line port facing “east” direction and a same setup for “west” direction. Channels outside the add/drop channel bands are glassed through the filter. The channel band from Extension to Line ports is 1460 -1630nm to enable e.g. OTDR signals to pass through the filters.

The monitor ports (Mon) tap off 1% of the transmitted and received Line signal. This provides the ability to monitor the channel power levels via a connected Optical Channel Monitoring (OCM) device or an optical spectrum analyzer. The DWDM channels are compliant with ITU-T G.694.1.

There are ten different filters covering the channel band 921 to 940.

H-OADM2x2-921-922-4C, H-OADM2x2-923-924-4C, H-OADM2x2-925-926-4C, H-OADM2x2-927-928-4C, H-OADM2x2-929-930-4C, H-OADM2x2-931-932-4C, H-OADM2x2-933-934-4C, H-OADM2x2-935-936-4C, H-OADM2x2-937-938-4C, H-OADM2x2-939-940-4C

The H-OADM2x2-xxx-yyy-4C is to be fitted in the H-Series 1RU chassis H-CHASSI-1RU.

Downloads