OSFP112 800G-2xLR4 SM 13xxnm 10km 7.1dB CMIS5
A 10km OSFP form-factor transceiver for 800Gbps Ethernet applications over 10km single-mode fiber enabling 800G or 2x400G break-out configurations
Product information
The TOC004-SC4C-SO is an OSFP112 form-factor transceiver for 800Gbps or 2x400G Ethernet applications. It is intended for use in data center interconnect between switches, routers, storage equipment etc. for optical distances up to 10km over single-mode fiber. The optical interface consists of two duplex LC connectors, allowing aggregation of two 400G-LR4-10 transceivers.
The electrical interface consists of eight 106.25G signals (800GAUI-8) that are converted to eight PAM4-modulated channels/lanes to transport the optical signal over CWDM wavelengths. The transceiver can also be set in 2x400GAUI-4 mode to enable 2x 400G break-out configurations. Digital diagnostics functions are available via an I2C interface, as specified by the CMIS revision 5.0.
The optical interface to the transceiver is two duplex LC connectors (UPC).
Forward Error Correction (FEC) is required to be implemented by the host in order to ensure reliable system operation. The FEC type shall be as defined in IEEE802.3bj, i.e. Reed Solomon RS(528,514). The optical parameters will provide a bit error ratio (BER) of 2.4 x 10-4.
Specification
- OSFP112 with an Dual duplex LC connector interface
- Up to 10km distance over single mode fiber cable
- 2x 400G-LR4-10 channels using four CWDM wavelengths each.
- The transceivers allows break-out of two 400G-LR4-10 streams.
- Less than 14W power consumption
- CMIS5.0 compliant management interface
- C-temp operating conditions (0°C to +70°C)
