OSFP112 800G-2xDR4 SM 1311nm 500m 3.1dB CMIS5
A 500m OSFP form-factor transceiver for 800Gbps Ethernet applications over 500m single-mode fiber enabling 800G or 2x400G break-out configurations
Product information
The TOC002-S31C-SO is an OSFP112 form-factor transceiver for 800Gbps or 2x400G Ethernet applications. It is intended for use in data center interconnect between switches, routers, storage equipment etc. for optical distances up to 500m over single-mode fiber. The optical interface consists of two MPO-12 connectors, allowing aggregation of two 400G-DR4 or eight 100G-DR transceivers.
The electrical interface consists of eight 106.25G signals (800GAUI-8) that are converted to eight PAM4-modulated channels/lanes to transport the optical signal over CWDM wavelengths. The transceiver can also be set in 2x400GAUI-4 and 8x100GAUI-1 mode to enable 2x 400G or 8x 100G break-out configurations. Digital diagnostics functions are available via an I2C interface, as specified by the CMIS revision 5.0.
The optical interface to the transceiver is two duplex LC connectors (UPC).
Forward Error Correction (FEC) is required to be implemented by the host in order to ensure reliable system operation. The FEC type shall be as defined in IEEE802.3bj, i.e. Reed Solomon RS(528,514). The optical parameters will provide a bit error ratio (BER) of 2.4 x 10-4.
Specification
- OSFP112 with an Dual MPO-12 connector interface
- Up to 500m distance over single mode fiber cable
- 8x 100Gbps PAM4 modulated channels using 8x 1311nm lanes
- Each 100Gbps lane is compliant with 100G-DR1 MSA enabling 800G to 100G or 800G to 400GBASE-DR4 break-out configurations
- Less than 14W power consumption
- CMIS5.0 compliant management interface
- C-temp operating conditions (0°C to +70°C)