SFP28 BiDi 25G 1270nm/1330nm SM 14dB 20km I-temp LC
A 20km SFP28 form-factor BiDi transceiver for 25Gbps Ethernet and CPRI opt 10 applications
Product information
The SO-SFP28-BX20D-xxyy-I is a bi-directional transceiver solution operating directly on a single-fiber without the need for a separate optical filter. This is achieved by having two transceivers that inject different wavelengths into the same single-fiber. The solution thus consists of two transceivers; SO-SFP28-BX20D-2733 and SO-SFP28-BX20D-3327, operating at 1270nm and 1330nm respectively. Using a single-fiber solution provides a cost-efficient solution for interconnect and it simplifies the patching since no separate transmit/receive direction has to be taken into account.
The transceiver pair supports 25GbE and CPRI option 10 services, having an optical performance that provides a bridgeable distance of up to 20km.
As stipulated by the 25G Ethernet standards, Forward Error Correction (FEC) is required to be implemented by the host equipment in order to ensure reliable system operation. The optical parameters below will provide a bit error ratio (BER) of 5 x 10-5 for 25G Ethernet. FEC will provide the required quality for secure service.
The transceiver solution is available in the Industrial temperature range (I-temp) of -40°C to +85°C (-40°F to +185°F). The transceivers provide digital diagnostic functions via a 2-wire serial interface as defined by the SFF-8472 specification.
Two products: SO-SFP28-BX20D-2733-I (Tx: 1270nm / Rx: 1330nm) and SO-SFP28-BX20D-3327-I (TX: 1330nm / Rx: 1270nm)
Specification
- BiDi SFP28 transceiver with a LC connector
- Two wavelength solution with in-build optical filters; Tx: 1270nm / Rx: 1330nm and Tx: 1330nm / Rx: 1270nm
- Support for 25G Ethernet and CPRI opt 10 applications
- Up to 20km distance, 14dB power budget
- Less than 1.5W power consumption
- I-temp operating conditions (-40°C to +80°C)